TED · EU-publicering

Delivery and installation of a ICP Reactive ion etcher for silicon dielctrics

Danmarks Tekniske Universitet - DTU · Udførelsessted: Kgs. Lyngby

ÅbenPubliceret 12. okt. 2026
Seneste import: 21. nov. 2026 · Se datadækning

Importvinduet er 4. jul. 2026–21. nov. 2026. Kildernes rapporterede resultater blev hentet inden for importvinduet. Dette er et udsnit af offentliggjorte udbud og omfatter ikke alle offentlige indkøb.

  • TED: importeret for vinduet · 21. nov. 2026
  • udbud.dk: importeret for vinduet · 21. nov. 2026

Resumé

Danmarks Tekniske Universitet - DTU har sendt „Delivery and installation of a ICP Reactive ion etcher for silicon dielctrics“ i udbud. Udførelsessted: Kgs. Lyngby. Tilbudsfrist: 23. nov. 2026.

Tilbudsfrist
2 dage tilbage · Haster
Estimeret værdi
Ikke oplyst
Ordregivertype
Uddannelse & Forskning
Indkøbsområde
IndustrimaskinerLaboratorieudstyr
  • Kort tilbudsfrist – kræver hurtig stillingtagen.

Udledt automatisk af kildeteksten. Emner er forslag og ikke gennemgået. Kontrollér altid originalen.

Beskrivelse fra kilden

DTU Nanolab wishes to acquire a high ion density source reactive ion etcher for oxides and nitrides of silicon to become its new primary instrument for 150 mm wafer processing. Delivery is expected no later than Q3 2027. The Instrument will be installed in the DTU Nanolab cleanroom - a university facility providing a comprehensive suite of micro- and nanofabrication tools. It serves a diverse community of over 200 active users, ranging from novice students to experienced researchers, as well a high percentage of commercial clients. As an open access tool, the Instrument must support the full spectrum of etching of silicon-based dielectrics, from sub 100 nm nanostructures defined by electron beam lithography to depths of several tens of microns. Meeting these demands requires exceptional process controllability and tunability: the system must perform ultra precise, low-rate etches (< 100 nm/min) with smooth and straight sidewalls and minimal undercut for shallow features, alongside high etch rate deep etches (approaching 500 nm/min). It must also accommodate all silicon dielectrics of the form SixNy, SixOx and SixOyNz, and be compatible with mask materials including Si, Cr, e-beam resists and UV/DUV photoresists with high mask selectivity for all these masking materials. The user interface must be intuitive and user friendly. The Instrument should be engineered to the highest industrial standards to minimize maintenance, and any required servicing must be straightforward and e

Dette er et begrænset kildeudsnit. Se fuld beskrivelse, dokumenter, rettelser og aktuelle betingelser i originalen.

Åbn det oprindelige udbud

Kendte frister

  • Tilbud23. nov. 2026

Fristerne er ikke knyttet til bestemte delaftaler i dette kildeudsnit. En fremtidig frist er ikke en samlet vurdering af hele procedurens status.

Relaterede udbud

Samme ordregiver eller indkøbsområde
TEDTildelingPubliceret 13. aug. 2026

Membrane Filtration System (water recovery system)

Required is a membrane filtration system. e.g., a reverse osmosis membrane system or nanofiltration system, cf. Appendix 1 – Requirement Specification.

Danmarks Tekniske Universitet - DTUVinder: DAVEY PRODUCTS
TEDTildelingPubliceret 13. aug. 2026

A mobile Cleaning In Place (CIP) system and a centralized pH system

This tender relates to the purchase of a mobile Cleaning In Place (CIP) system and a centralized pH System for the demonstrator-scale acetone production plant, representing the primary outcome of the PYROCO2 project. The…

Danmarks Tekniske Universitet - DTUVinder: Parcitank SA